[1]郭登明,汪隨,卞和滿.高壓管匯活動彎頭的接觸分析及結構改進[J].石油機械,2018,46(03):72-77.[doi:10.16082/j.cnki.issn.1001-4578.2018.03.013]
 Guo Dengming,Wang Sui,Bian Heman.Contact Analysis and Structural Improvement of the Swivel Joints in High Pressure Manifold[J].China Petroleum Machinery,2018,46(03):72-77.[doi:10.16082/j.cnki.issn.1001-4578.2018.03.013]
點擊復制

高壓管匯活動彎頭的接觸分析及結構改進

參考文獻/References:

[1] 謝永金,樊建春,張宏,等.頁巖氣開發用高壓管匯損傷機理及檢測技術[J].石油機械,2011,39(增刊1):109-112. XIE Y J, FAN J C, ZHANG H, et al. Damage mechanism and detection technology of high pressure manifold for shale gas development[J]. China Petroleum Machinery, 2011, 39(S1):109-112.
[2] 張繼信,康健,樊建春,等.高壓彎管沖蝕失效分析及數值模擬[J].潤滑與密封,2016,41(10):40-46. ZHANG J X, KANG J, FAN J C, et al. Failure analysis and numerical simulation of high pressure elbow erosion wear[J]. Lubrication Engineering, 2016, 41(10):40-46.
[3] 徐曉東,黃志國.提高高壓活動彎頭體使用壽命的工藝途徑[J].機械設計與制造,2005(7):118-119. XU X D, HUANG Z G. A technological way to the improvement of the extension of service life of high pressure movable bend[J]. Machinery Design & Manufacture, 2005(8):118-119.
[4] MARK D M, BRIAN C W. Swivel joint with uniform ball bearing requirements:8870233B2[P].2014-10-28.
[5] UNGCHUSRI T, CASTILLO S A. Swivel joint with stepped bearing races:RE39695 E[P]. 2007-06-19.
[6] 郭登明,左彩靈,蔣波,等.超高壓力高壓管匯:CN205189773U[P]. 2016-04-27. GUO D M, ZUO C L, JIANG B, et al. Ultra-high pressure high pressure manifold:CN205189773U[P]. 2016-04-27.
[7] 岡本純三.球軸承的設計計算[M].黃志強,譯.北京:機械工業出版社,2003:1-10. Okamoto. Design calculation of ball bearing[M]. HUANG Z Q, trans. Beijing:China Machine Press, 2003:1-10.
[8] 何沖.風電偏航軸承接觸應力分析與疲勞壽命研究[D].秦皇島:燕山大學機械工程學院,2014. HE C. Contact stress analysis and fatigue life studies of wind power yaw bearing[D]. Qinhuangdao:Yanshan University, 2014.
[9] 張杰, 梁政, 韓傳軍, 等. 深穴空心推力圓錐滾子軸承的設計及接觸分析[J]. 華中科技大學學報(自然科學版), 2014, 42(6):28-32. ZHANG J, LIANG Z, HAN C J, et al. Design and contact analysis of deep cavity hollow tapered roller thrust bearing[J]. Journal of Huazhong University of Science & Technology (Natural Science Edition), 2014, 42(6):28-32.
[10] 郭登明, 周靖力, 肖信武, 等. 延長高壓活動彎頭壽命的工藝研究[J]. 石油機械, 2017, 46(5):86-88, 94. GUO D M, ZHOU J L, XIAO X W, et al. Study on the technology for extending service life of high pressure movable elbow[J]. China Petroleum Machinery, 2017, 46(5):86-88, 94.

相似文獻/References:

[1]郭登明,周靖力,肖信武,等.延長高壓活動彎頭壽命的工藝研究[J].石油機械,2017,45(05):86.[doi:10.16082/j.cnki.issn.1001-4578.2017.05.016]
 Guo Dengming,Zhou Jingli,Xiao Xinwu,et al.Study on the Technology for Extending Service Life of High Pressure Movable Elbow[J].China Petroleum Machinery,2017,45(03):86.[doi:10.16082/j.cnki.issn.1001-4578.2017.05.016]
[2]李方淼,李美求,宋楊,等.液固兩相流對活動彎頭的沖蝕研究[J].石油機械,2019,47(10):107.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.018]
 Li Fangmiao,Li Meiqiu,Song Yang,et al.Erosion of Liquid-Solid Two-Phase Flow on Bend Pipe Union[J].China Petroleum Machinery,2019,47(03):107.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.018]

備注/Memo

收稿日期:2017-11-21。
基金項目:中國石油科技創新基金項目(2015D-5006-0310);一種帶有多級滾道槽的活動彎頭已獲中國專利,專利號:CN201720119044.5。
作者簡介:郭登明,教授,生于1963年,1985年畢業于江漢石油學院機械工程系,現從事石油機械的教學與科研工作。地址:(434023)湖北省荊州市。
通訊作者:汪隨,E-mail:[email protected]

更新日期/Last Update: 1900-01-01
1000期双色球走势图助手彩吧