[1]曹銀萍,竇益華,李明飛,等.彎曲段套管的扁化變形及其對抗擠強度的影響[J].石油機械,2019,47(10):14-19.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.003]
 Cao Yinping,Dou Yihua,Li Mingfei,et al.The Flattening Deformation of the Curved Section Casing and Its Influence on the Collapse Strength[J].China Petroleum Machinery,2019,47(10):14-19.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.003]
點擊復制

彎曲段套管的扁化變形及其對抗擠強度的影響

參考文獻/References:

[1] 竇益華,張福祥.高溫高壓深井試油井下管柱力學分析及其應用[J].鉆采工藝,2007,30(5):17-20. DOU Y H, ZHANG F X. Mechanical analysis of well testing down-hole string in deep well with HTHP and its application[J]. Drilling & Production Technology, 2007,30(5):17-20.
[2] 李子豐.油氣井桿管柱力學研究進展與爭論[J].石油學報,2016,37(4):531-556. LI Z F. Research advances and debates on tubular mechanics in oil and gas wells[J]. Acta Petrolei Sinica,2016,37(4):531-556.
[3] API. Bulletin on formulas and calculations for casting, tubing, drill pipe, and line pipe properties exploration and production department:API BULLETIN 5C3[S]. Washington:API Publishing Services, 1999.
[4] HUANG W J,GAO D L. A theoretical study of the critical external pressure for casing collapse[J].Journal of Natural Gas Science & Engineering,2015,27:290-297.
[5] 徐德奎,任虎彪,李明飛,等. 考慮彎矩和剪切影響的造斜段套管抗擠強度分析[J]. 石油機械,2016,44(9):11-14. XU D K,REN H B,LI M F,et al. Analysis of collapsing strength of casing in buildup section considering bending moment and shear influence[J].China Petroleum Machinery,2016,44(9):11-14.
[6] 申昭熙.套管外壓擠毀強度分析與計算[J].應用力學學報,2011,28(5):547-550. SHEN Z X.Theoretic analysis and calculation of collapse strength of casing[J]. Chinese Journal of Applied Mechanics,2011,28(5):547-550.
[7] 賈宗文,劉書杰,耿亞楠,等.彎曲井段套管抗擠強度理論及試驗研究[J].石油機械,2018,46(9):100-105. JIA Z W, LIU S J, GENG Y N, et al. Theoretical and experimental study on the collapse strength of casing in curved well section[J]. China Petroleum Machinery, 2018,46(9):100-105.
[8] 黃根爐,陳忠帥,馬慶濤,等.彎曲井眼中套管抗擠強度計算[J].石油機械,2011,39(4):38-40. HUANG G L, CHEN Z S, MA Q T, et al. The calculation of the casing collapse strength in bending hole[J].China Petroleum Machinery,2011,39(4):38-40.
[9] 蔣官澄,胡冬亮,許發賓.彎曲套管抗擠強度有限元ANSYS分析方法[J].斷塊油氣田,2009,16(4):134-136. JIANG G C, HU D L, XU F B. Finite element ANSYS analysis method of bending casing collapsing strength[J].Fault-block Oil & Gas Field, 2009,16(4):134-136.
[10] KURIYAMA Y, TSUKANO Y, MIMAKI T, et al. Effect of wear and bending on casing collapse strength[R]. SPE 24597-MS,1992.
[11] 董文濤,吳萌,張弘,等.體積壓裂時套管彎曲應力放大計算分析[J].鉆采工藝, 2018,41(5):9-11. DONG W T,WU M,ZHANG H,et al.Calculating casing bending stress amplification during SRV fracturing[J].Drilling & Production Technology, 2018, 41(5):9-11.
[12] 張華禮,陳朝偉,石林,等.流體通道形成機理及在四川頁巖氣套管變形分析中的應用[J].鉆采工藝,2018, 41(4):8-11. ZHANG H L,CHEN Z W,SHI L,et al.Mechanism of how fluid passage formed and application in Sichuan shale gas casing deformation analysis[J].Drilling & Production Technology, 2018, 41(4):8-11.
[13] 馬更生,田雅琴,黃慶學.厚壁鋼管壓力矯直時的截面扁化計算[J].重型機械,2012(2):45-48. MA G S, TIAN Y Q, HUANG Q X. Calculation of cross section flattening for thick-walled steel pipe during pressure straightening[J]. Heavy Machinery,2012(2):45-48.
[14] ZHANG L C, YU T X. An investigation of the brazier effect of a cylindrical tube under pure elastic-plastic bending[J].International Journal of Pressure Vessels & Piping,1987,30(2):77-86.
[15] 鄂大辛,郭學東,寧汝新.管材彎曲中應變中性層位移的分析[J].機械工程學報,2009,45(3):307-310. E D X, GUO X D, NING R X.Analysis of strain neutral layer displacement in tube-bending process[J]. Journal of Mechanical Engineering,2009,45(3):307-310.
[16] 鄂大辛,寧汝新,古濤.管材彎曲過程中的彈塑性變形分析[J].兵工學報,2009,30(10):1353-1356. E D X, NING R X, GU T. Analysis on the elastic-plastic deformation during tube-bending process[J].Acta Armamentarii,2009,30(10):1353-1356.
[17] BRAZIER L G. On the flexure of thin cylindrical shells and other thin sections[J].Proceedings of the Royal Society of London.Series A,Containing Papers of a Mathematical and Physical Character,1927,116(773):104-114.
[18] 鐘華勇,翟華,李玉寶.鋯合金薄壁管三點彎校直中的截面扁化[J].塑性工程學報,2011,18(4):97-100. ZHONG H Y, ZHAI H, LI Y B.The cross section flattening of zirconium alloys thin walled pipe in three points straightening[J]. Journal of Plasticity Engineering,2011,18(4):97-100.
[19] MICHAEL T C,VEERAPPAN A R,SHANMUGAM S. Effect of ovality and variable wall thickness on collapse loads in pipe bends subjected to in-plan bending closing moment[J].Engineering Fracture Mechanics, 2012,79(4):138-148.
[20] MESHI T,ITO Y.Proposal of failure criterion applicable to finite element analysis results for wall-thinned pipes under bending load[J].Nuclear Engineering and Design,2012,242:34-42.
[21] 余同希,章亮熾. 塑性彎曲理論及其應用[M]. 北京:科學出版社,1992. YU T X, ZHANG L C.Plastic bending theory and its application[M]. Beijing:Science Press,1992.
[22] 薛嘉行,姜開厚,楊嘉陵,等.彈塑性圓管受純彎載荷作用的實驗研究[J].應用力學學報,2000,17(4):50-57. XUE J X, JIANG K H, YANG J L, et al. An experimental research on elasto-plastc circular pipe under bending loads[J].Chinese Journal of Applied Mechanics,2000,17(4):50-57.
[23] 徐芝綸.彈性力學簡明教程[M]. 4版. 北京:高等教育出版社,2013. XU Z L. Concise course on elasticity[M]. 4th edition. Beijing:Higher Education Press,2013.
[24] 郝俊芳,龔偉安.套管強度計算與設計[M].北京:石油工業出版社,1987. HAO J F, GONG W A. Calculation and design of casing strength[M]. Beijing:Petroleum Industry Press,1987.

相似文獻/References:

[1]王建軍,林凱,申昭熙,等.幾何尺寸影響下的高鋼級套管擠毀變形探討[J].石油機械,2010,(03):72.
[2]廖柯熹,褚榮光,孫華鋒,等.套管壁厚對儲氣井井筒受力的影響分析[J].石油機械,2010,(05):36.
[3]盧亞鋒,林元華,趙鐵,等.高腐蝕環境下油井管剩余抗擠強度的理論解[J].石油機械,2010,(08):17.
[4]楊元東,安青龍,王曉東.鉆桿套管兩用動力鉗的研制及應用[J].石油機械,2010,(09):49.
[5]李龍,邵詩軍,顧純巍,等.新文昌油田群水下井口回接技術[J].石油機械,2011,(02):85.
[6]練章華,楊龍,馮耀榮,等.J55膨脹套管實物試驗研究[J].石油機械,2011,(03):16.
[7]景宇富,程為彬,郭穎娜,等.井下套管聲波通訊的小波去噪[J].石油機械,2011,(06):33.
[8]王軍.側鉆水平井彎曲段套管抗擠強度研究[J].石油機械,2011,(07):37.
[9]田曉潔,劉永紅,林榮桔,等.深海套管切割工具的研究和發展現狀[J].石油機械,2011,(11):67.
[10]李永慧,張曉明,龍達峰,等.基于ANSYS的油井套管感應磁場有限元仿真[J].石油機械,2012,(01):44.
[11]徐德奎,任虎彪,李明飛,等.考慮彎矩和剪切影響的造斜段套管抗擠強度分析[J].石油機械,2016,44(09):11.[doi:10.16082/j.cnki.issn.1001-4578.2016.09.003]
 Xu Dekui,Ren Hubiao,Li Mingfei,et al.Analysis of Collapsing Strength of Casing in Buildup Section Considering Bending Moment and Shear Influence[J].China Petroleum Machinery,2016,44(10):11.[doi:10.16082/j.cnki.issn.1001-4578.2016.09.003]
[12]賈宗文,劉書杰,耿亞楠,等.彎曲井段套管抗擠強度理論及試驗研究[J].石油機械,2018,46(09):100.[doi:10.16082/j.cnki.issn.1001-4578.2018.09.019]
 Jia Zongwen,Liu Shujie,Geng Yanan,et al.Theoretical and Experimental Study on the Collapse Strength of Casing in Curved Well Section[J].China Petroleum Machinery,2018,46(10):100.[doi:10.16082/j.cnki.issn.1001-4578.2018.09.019]

備注/Memo

收稿日期:2019-05-30。
基金項目:國家自然科學基金項目“頁巖氣水平井壓裂與生產套管變形機理及其控制機制研究”(51674199)。
作者簡介:曹銀萍,女,副教授,生于1982年,2010年畢業于西北工業大學兵器科學與技術專業,現從事石油機械及油套管柱安全性研究工作。地址:(710065)陜西省西安市。電話:(029)88382617。E-mail:[email protected]
通訊作者:竇益華,E-mail:[email protected]

更新日期/Last Update: 1900-01-01
1000期双色球走势图助手彩吧