[1]馬粵,朱紅鈞,傅劍峰,等.柱狀氣液分離器分離效果的數值模擬分析[J].石油機械,2019,47(10):49-55,87.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.009]
 Ma Yue,Zhu Hongjun,Fu Jianfeng,et al.Numerical Simulation Analysis of Separation Performance of Columnar Gas-Liquid Separator[J].China Petroleum Machinery,2019,47(10):49-55,87.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.009]
點擊復制

柱狀氣液分離器分離效果的數值模擬分析

參考文獻/References:

[1] 姚春東,蘇艷玲,冷陸游.電潛泵井系統效率的仿真模型[J].石油機械,2013,41(5):64-68. YAO C D, SU Y L, LENG L Y. Simulation model of ESP well system efficiency[J]. China Petroleum Machinery,2013,41(5):64-68.
[2] 吳應湘,許晶禹.油水分離技術[J].力學進展,2015,45(6):181-216. WU Y X, XU J Y. Oil and water separation technology[J]. Advances in Mechanics,2015,45(6):181-216.
[3] 仇晨,劉培琳,尹豐.一種新型的高效節能GLCC分離器在中海油的應用研究[J].中國海洋平臺,2010,25(5):45-48. QIU C, LIU P L, YIN F. Application research of a high efficient new energy saving sparator GLCC in CNOOC[J].China Offshore Platform,2010,25(5):45-48.
[4] 程兵,李彥輝,李清平.海洋石油多相流立管嚴重段塞流控制方法[J].油氣儲運, 2013,32(12):1285-1288. CHENG B, LI Y H, LI Q P. Control method of severe slug flow in riser of offshore oil multiphase flow[J]. Oil&Gas Storage and Transportation,2013,32(12):1285-1288.
[5] 周巍巍,崔航.基于"GLCC+三相分離器"的計量系統[J].自動化應用, 2013(3):30-34. ZHOU W W, CUI H. Design and application of metering system based on "GLCC+three phase separator" [J]. Automation Application, 2013(3):30-34.
[6] 孫欽,洪毅.邊際油田交接計量系統研究與應用[J].中國海上油氣,2010,22(5):349-351. SUN Q,HONG Y. Research and application of custody metering system in marginal oil field[J]. China Offshore Oil and Gas,2010,22(5):349-351.
[7] 周云龍,倪志勇.柱狀分離器結構改進及實驗研究[J].化工機械, 2014,41(5):557-561. ZHOU Y L, NI Z Y. Structure improvement and experimental study of cylindrical gas liquid cyclone[J]. Chemical Engineering&Machinery,2014,41(5):557-561.
[8] 蔣明虎,范大為,王宣.柱狀氣液分離器結構優化設計[J].大慶石油學院學報, 2009,33(3):89-92. JIANG M H, FAN D W, WANG X. Optimization design of cylindrical gas-liquid separator[J]. Journal of Daqing Petroleum Institute,2009,33(3):89-92.
[9] 路遠.深海GLCC分離器入口噴嘴結構改進實驗研究[D].北京:中國石油大學(北京),2016. LU Y. Experimental study on the improvement of inlet nozzle geometrys on gas-liquid cylindrical cyclone in subsea production system[D]. Beijing:China University of Petroleum (Beijing),2016.
[10] 謝駿遙,秦蕊,李清平. GLCC數值模擬中湍流模型選取研究[J].石油機械, 2017,45(3):85-92. XIE J Y,QIN R,LI Q P. Turbulence model selection in numerical simulation of gas-liquid cylindrical cyclone[J]. China Petroleum Machinery, 2017,45(3):85-92.
[11] 張兆順,崔桂香,許春曉,等.湍流理論與模擬[M].北京:清華大學出版社,2017. ZHANG Z S,CUI G X,XU C X,et, al.Theory and modeling of turbulence[M]. Beijing:Tsinghua University Press,2017.

相似文獻/References:

[1]熊磊,朱宏武,張金亞,等.海底分離技術的最新進展[J].石油機械,2010,(10):75.
[2]吳小林,姬忠禮,熊至宜,等.乙烯工藝減粘塔氣液分離性能研究[J].石油機械,2010,(12):9.
[3]于洪英,潘志遠,姜彥.渦流高效防砂分離器研制與應用[J].石油機械,2011,(10):103.
[4]蘇民德,俞接成,陳家慶. 內聯式脫液器的設計及其數值模擬[J].石油機械,2015,43(02):49.
 [J].China Petroleum Machinery,2015,43(10):49.
[5]張家源,趙會軍,周寧,等.不同回轉形狀螺旋管內油水分離數值模擬研究[J].石油機械,2018,46(03):89.[doi:10.16082/j.cnki.issn.1001-4578.2018.03.016]
 Zhang Jiayuan,Zhao Huijun,Zhou Ning,et al.Numerical Simulation of Oil-water Separation in Spiral Pipe with Different Rotary Shapes[J].China Petroleum Machinery,2018,46(10):89.[doi:10.16082/j.cnki.issn.1001-4578.2018.03.016]

備注/Memo

收稿日期:2019-06-21。
作者簡介:馬粵,工程師,生于1990年,2015年畢業于西南石油大學石油與天然氣工程學院流體力學專業,獲碩士學位,現從事海洋油氣開采工作。地址:(524000)廣東省湛江市。E-mail:[email protected]

更新日期/Last Update: 1900-01-01
1000期双色球走势图助手彩吧