[1]陳文康,巨亞鋒,杜宇成,等.基于水平井的修井作業組合管柱載荷模型研究[J].石油機械,2019,47(10):62-68.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.011]
 Chen Wenkang,Ju Yafeng,Du Yucheng,et al.Load Model of Combined Workover String Based on Horizontal Well[J].China Petroleum Machinery,2019,47(10):62-68.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.011]
點擊復制

基于水平井的修井作業組合管柱載荷模型研究

參考文獻/References:

[1] 劉格宏. 水平井多級壓裂管柱力學分析及軟件開發[D]. 成都:西南石油大學,2017. LIU G H. Mechanical analysis and software development of multistage fracturing string in horizontal well[D]. Chengdu:Southwest Petroleum University,2017.
[2] 劉修善.井眼軌跡的平均井眼曲率計算[J].石油鉆采工藝,2005,27(5):11-15. LIU X S. Average borehole curvature calculation of hole trajectory[J].Oil Drilling & Production Technology,2005,27(5):11-15.
[3] GAO G H. Effects of boundary conditions and friction on static buckling of pipe in a horizontal well[R]. SPE 111511,2008.
[4] MIRHAJ A,KAARSTAD E, AADNOY B S. Minimizing friction in shallow horizontal wells[R].SPE 135812,2010.
[5] CARPENTER C. Friction-load redistribution for exten-ded-reach and horizontal-well completions[J]. Journal of Petroleum Technology, 2016,68(11):65-66.
[6] MCSPADDEN A R, TREVISAN R. Friction load redi-stribution for robust and cost efficient design of extended reach and horizontal well completions[R].SPE 178905,2016.
[7] 郭鳳超,陶亮,賈曉斌.水平井鉆井管柱力學模型與軟件開發[J].石油機械,2013,41(7):28-32. GUO F C,TAO L,JIA X B. Mechanical model of horizontal drilling string and software development[J].China Petroleum Machinery,2013,41(7):28-32.
[8] 劉朕,練章華,王磊,等.定向井全井段鉆柱下放過程應力及接觸力分析[J].石油機械,2012,40(6):13-16. LIU Z, LIAN Z H, WANG L, et al. Stress and contact force analysis of whole hole drill sting rungning in directional well[J].China Petroleum Machinery,2012,40(6):13-16.
[9] 張楊.水平井套管摩阻計算與可下入性分析[D]. 成都:西南石油大學,2015. ZHANG Y. Calculation and analysis of casing friction in horizontal well[D]. Chengdu:Southwest Petroleum University,2015.
[10] 馮定,施雷,夏成宇,等.定向井的多層分注管柱串通過性分析[J].西南石油大學學報(自然科學版),2016,38(3):162-169. FENG D, SHI L, XAI C Y, et.al. The pass-through capacity analysis for multi-layer injectionstrings in directional wells[J].Journal of Southwest Petroleum University(Science & Technology Edition),2016,38(3):162-169.
[11] 馮定,鄢標,夏成宇,等.井眼軌跡控制工具主軸力學行為分析[J].科學技術與工程,2016,16(4):173-177. FENG D, YAN B,XIA C Y, et al. The mechanical behavior analyse of spindle in wellboretrack control tool[J].Science Technology and Engineering,2016,16(4):173-177.
[12] 陳勇,蔣祖軍,練章華,等.水平井鉆井摩阻影響因素分析及減摩技術[J].石油機械,2013,41(9):29-32. CHEN Y, JIANG Z J, LIAN Z H, et al. Analysis of influencing factors of horizontal drilling friction and antifriction technology[J].China Petroleum Machinery,2013,41(9):29-32.
[13] 孫巧雷,馮定,楊行,等.軸向載荷波動下海上測試管柱動力響應與安全系數分析[J].中國安全生產科學技術,2018,14(11):19-25. SUN Q L,FENG D,YANG H,et al. Analysison dynamic response and safety coefficient of offshore testing string under axial load fluctuation[J].Journal of Safety and Technology,2018,14(11):19-25.
[14] 祝效華,李柯,安家偉.水平井鉆柱動態摩阻扭矩計算與分析[J].天然氣工業,2018,38(8):75-82. ZHU X H,LI K, AN J W. Calculation and analysis of dynamic drag and torque of horizontal well strings[J]. Natural Gas Industry,2018,38(8):75-82.

備注/Memo

收稿日期:2019-04-16。
基金項目:國家自然科學基金項目“瞬變流誘發深層氣井油管柱振動碰撞耦合機理研究”(51704034);國家科技重大專項“深層頁巖氣開發關鍵裝備及工具研制”(2016ZX05038-002-LH001);中海石油(中國)有限公司湛江分公司橫向項目“深水測試風險評估及安全控制技術研究”(CCL2017ZJFN2272)。
作者簡介:陳文康,生于1994年,現為在讀碩士研究生,從事油氣井管柱力學及井下工具設計方面的研究工作,地址:(434023)湖北省荊州市。E-mail:[email protected]
通訊作者:馮定,E-mail:[email protected]

更新日期/Last Update: 1900-01-01
1000期双色球走势图助手彩吧