[1]姚治明,易先中,周元華,等.CDJY2500型五缸壓裂泵泵頭體力學特性分析[J].石油機械,2019,47(10):81-87.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.014]
 Yao Zhiming,Yi Xianzhong,Zhou Yuanhua,et al.Mechanical Analysis of the Pump Head of the CDJY2500 Five-Cylinder Fracturing Pump[J].China Petroleum Machinery,2019,47(10):81-87.[doi:10.16082/j.cnki.issn.1001-4578.2019.10.014]
點擊復制

CDJY2500型五缸壓裂泵泵頭體力學特性分析

參考文獻/References:

[1] 閆志琴.壓裂泵柱塞優化設計研究[J].制造業自動化,2015(16):54-58. YAN Z Q. Research on optimal design of fracturing pump plunger[J]. Automation of Manufacturing Industry,2015(16):54-58.
[2] 胡瑾秋,王倩琳,張來斌,等.變壓力工況下壓裂泵的疲勞失效演化規律研究[J].石油機械,2017,45(4):67-73. HU J Q, WANG Q L, ZHANG L B,et al.Research on fatigue failure evolution of fracturing pumps under variable pressure conditions[J]. China Petroleum Machinery,2017,45(4):67-73.
[3] 陳純明,康宜華.固井壓裂用TH泵泵頭體有限元分析及材質選用[J].石油機械,2002,30(10):12-15. CHEN C M,KANG Y H.Finite element analysis and material selection of TH pump head for cementing and fracturing[J]. China Petroleum Machinery,2002,30(10):12-15.
[4] 鄧小華,李輝榮,曾慶富.1050型高壓壓裂泵閥箱的有限元分析[J].石油礦場機械,1992,21(3):43-46. DENG X H,LI H R,ZENG Q F.Finite element analysis of type 1050 high-pressure fracturing pump valve box[J]. Oil field Equipment,1992,21(3):43-46.
[5] 陶春達,戰人瑞.高壓注水泵泵頭體的有限元分析[J].西南石油學院學報,1997,19(2):55-59. TAO C D,ZHAN R R.Finite element analysis of head body of high pressure injection pump[J]. Journal of Southwest Petroleum University,1997,19(2):55-59.
[6] 方惠軍,杜道軍,周海軍,等.基于局部網格細化的泵頭體強度有限元分析[J].石油機械,2013,41(7):98-101. FANG H J,DU D J,ZHOU H J,et al. Local mesh refinementbaced finite element analysis of pump head strength[J]. China Petroleum Machinery,2013,41(7):98-101.
[7] 劉成,易先中,朱植宇,等.基于ABAQUS的五缸泵頭體有限元分析[J].機電工程技術,2018,47(2):42-44. LIU C,YI X Z,ZHU Z Y,et al.Finite element analysis of five-cylinder pump head body based on ABAQUS[J]. Mechanical and Electrical Engineering Technology, 2018,47(2):42-44.
[8] 韓棟,修吉平,李佳玲,等.壓裂泵泵頭體失效分析[J].失效分析與預防,2012,7(2):126-131. HAN D,XIU J P,LI J L,et al, Failure analysis on head body of fracturing pump[J]. Failure Analysis and Prevention,2012,7(2):126-131.
[9] 張思,周思柱,李寧.壓裂泵泵頭體相貫線裂尖應力場及應力強度因子研究[J].科學技術與工程,2017,17(5):185-190. ZHANG S,ZHOU S Z,LI N.Research on stress field and stress intensity factor of fracture tip along the intersecting line of fracturing pump head body[J]. Science Technology and Engineering,2017,17(5):185-190.
[10] 劉國川,李良其,羅俊濤.壓裂泵液力端產生裂紋的原因及預防措施研究[J].化工管理,2016(18):203. LIU G C,LI L Q,LUO J T.Study on causes and preventive measures of hydraulic end cracks in fracturing pump[J]. Chemical Enterprise Management,2016(18):203.
[11] 王長健.壓裂泵泵頭體裂紋原因分析及應對措施[J].金屬熱處理,2014(9):151-154. WANG C J.Cause analysis and countermeasures of fracturing pump head body crack[J]. Metal Heat Treatment,2014(9):151-154.
[12] 張洪生,方超.6500HP型壓裂泵主要技術參數的優化研究[J]. 機械制造,2016,54(4):51-53. ZHANG H S,FANG C.Optimization of main technical parameters of 6500HP fracturing pump[J]. Machinery Manufacturing,2016,54(4):51-53.
[13] 全國石油鉆采設備及工具標準化技術委員會. 油田壓裂用柱塞泵型式與基本參數:SY/T 5463-1992[S].北京:中國標準出版社,1992:1-2. The National Technical Committee for the Standardization of Oil Drilling Equipment and Tools. Oilfield plunger pump type and basic parameters for fracturing:SY/T 5463-1992[S]. Beijing:China Standard Press,1992:1-2.

相似文獻/References:

[1]王磊,劉順洪,王成章. 基于機器人的泵頭體焊接修復[J].石油機械,2014,(07):60.
 [J].China Petroleum Machinery,2014,(10):60.
[2]李寧,李友榮,周思柱,等. 基于混合硬化模型的超高壓泵頭體自增強研究[J].石油機械,2015,43(02):74.
 [J].China Petroleum Machinery,2015,43(10):74.
[3]蔣發光,賀環慶,李峰,等.3500壓裂泵軸承變形對機架性能影響的研究[J].石油機械,2016,44(03):88.[doi:10.16082/j.cnki.issn.1001-4578.2016.03.019]
 Jiang Faguang,He Huanqing,Li Feng,et al.The 3500 Fracturing Pump Bearings’ Deformation Effects on the Rack Performance[J].China Petroleum Machinery,2016,44(10):88.[doi:10.16082/j.cnki.issn.1001-4578.2016.03.019]
[4]孫汝奇,岳愛麗,劉忠硯,等.高壓作業下管匯的空間流固耦合分析[J].石油機械,2016,44(07):103.[doi:10.16082/j.cnki.issn.1001-4578.2016.07.022]
 Sun Ruqi,Yue Aili,Liu Zhongyan,et al.Spatial Fluid-solid Interaction Analysis of Manifold in High Pressure Operation[J].China Petroleum Machinery,2016,44(10):103.[doi:10.16082/j.cnki.issn.1001-4578.2016.07.022]
[5]胡瑾秋,王倩琳,張來斌,等.變壓力工況下壓裂泵的疲勞失效演化規律研究[J].石油機械,2017,45(04):67.[doi:10.16082/j.cnki.issn.1001-4578.2017.04.015]
 Hu Jinqiu,Wang Qianlin,Zhang Laibin,et al.Fatigue Failure Evolution of Fracturing Pump under Changing Pressure Condition[J].China Petroleum Machinery,2017,45(10):67.[doi:10.16082/j.cnki.issn.1001-4578.2017.04.015]
[6]田雨,謝梅英.新型大功率電動壓裂泵組的研制[J].石油機械,2017,45(04):94.[doi:10.16082/j.cnki.issn.1001-4578.2017.04.021]
 Tian Yu,Xie Meiying.Development of New-type Superpower Electric Fracturing Pump Skid[J].China Petroleum Machinery,2017,45(10):94.[doi:10.16082/j.cnki.issn.1001-4578.2017.04.021]
[7]王慶群.利用電力開展頁巖氣壓裂規模應用的分析及建議[J].石油機械,2018,46(07):89.[doi:10.16082/j.cnki.issn.1001-4578.2018.07.017]
 Wang Qingqun.Analysis and Suggestion on the Application of Electric Power on Shale Gas Fracturing[J].China Petroleum Machinery,2018,46(10):89.[doi:10.16082/j.cnki.issn.1001-4578.2018.07.017]
[8]楊子玉,李美求,李寧.壓裂作業中高壓管匯諧響應分析[J].石油機械,2019,47(11):87.[doi:10.16082/j.cnki.issn.1001-4578.2019.11.014]
 Yang Ziyu,Li Meiqiu,Li Ning.Harmonic Response Analysis of High Pressure Manifold in Fracturing Operation[J].China Petroleum Machinery,2019,47(10):87.[doi:10.16082/j.cnki.issn.1001-4578.2019.11.014]
[9]魏超,周思柱,華劍,等.壓裂泵泵頭體內腔相貫線裂尖J積分研究[J].石油機械,2018,46(11):85.[doi:10.16082/j.cnki.issn.1001-4578.2018.11.014]
 Wei Chao,Zhou Sizhu,Hua Jian,et al.Research on J integral of Crack Tip on Intersecting Line of Fracturing Pump Head[J].China Petroleum Machinery,2018,46(10):85.[doi:10.16082/j.cnki.issn.1001-4578.2018.11.014]

備注/Memo

收稿日期:2019-04-22。
基金項目:國家科技重大專項“鉆井協同自動控制系統研發”(2016ZX05022006-004)、“復雜結構井、叢式井設計與控制新技術”(2017ZX05009-003);國家高技術船舶科研計劃項目“海洋大功率往復式壓縮機研制”(工信部聯裝[2014]506號);湖北省技術創新專項“深部地熱資源綜合開發利用關鍵技術”(2016ACA181);NSFC-石油化工聯合基金項目“頁巖和致密油氣田高效開發建井基礎研究”(U1762214、U1262108、51974035)。
作者簡介:姚治明,生于1991年,2014年畢業于長江大學機械設計及其自動化專業,現從事管柱力學和石油鉆采工具的研究工作。地址:(434023)湖北省荊州市。E-mail:[email protected]
通訊作者:易先中,E-mail:[email protected]

更新日期/Last Update: 1900-01-01
1000期双色球走势图助手彩吧